Check the jig on both sides of the groove to see if they are both straight. If they are not then send the jig back. If they are both straight...
Not sure if I can recommend this but if not the admin guys will delete it. I have a blog with alot of free info on many aspects of kitchen...
I agree with John with regard to laminate worktops. I only use biscuits on solid wood worktops because of the extra stresses involved with a...
Forgot to mention that if the levels of the floor are checked before fitting the base units allowances can be made, when leveling the units in, so...
You have several options here depending on your preferred finished look and how much work/cost you are prepared to accept. 1, Easiest option is...
I never machine more than 3 complete joints with a new or freshly ground/sharpened cutter. Sometimes what can happen when the cutter is worn...
I just thought I would add a suggestion to get this thread back on track to answer the o p's original question. :) I agree with those that...
There is a saying that goes "The quality is remembered long after the price has been forgotten" so if he wants a cheap job, let him get someone...
I have been using the HIB worktop jig for over 20 years and have not had a problem with out of square corners so long as you remove the "correct"...
Maybe, but you have certainly got me on the amount of comments posted :)
If there is a corner always start from there. If it is not the lowest part of the room the height difference will need to be worked out from the...
There are several good makes of router cutters and jigsaw blades but my personal choice is Trend router cutters and bosch jigsaw blades. Ray Brock
* I aim to give feedback on this forum to the best of my knowledge using my own personal experience for the benefit of whoever wants to read...
i published the post by mistake as I wanted to preview it! The third paragraph from the end should read as ( onto the underside of the second...
Not sure why you would want to mitre a corner joint on worktop instead of doing a Butt & Scribe joint but will answer your question. I will...
I do not know the circumstances as to why you say Blum would be way to expensive for the Kitchen but I would always go for quality every time....
I always use the trammel method on my router. Mark a line down the centre of the breakfast bar(all marking out done on masking tape). Then...
If all of the door sizes on the existing kitchen can be matched up ok with the new doors then check to see if they are available undrilled so then...
I agree with Johnnyfingers. When I fit wooden worktops I give them a coat of oil on the underside once a day for the first 3 days whilst I am...
Separate names with a comma.