channel

Hi all I had to remove the glass panels from this quadrant shower cubicle and I'm struggling to get one of the screens back in place properly. The small glass panel is supposed to slide into the wall channel, and some holes in the side of the channel (inside the cubicle) should align with some...

Hello I'm an absolute amateur in the third stage for my first DIY project of a display cabinet housed inside an unused chimney breast I have some 6mm recessed led profiles that I want to place into the front of the 18mm MDF Im concerned if I route out 6mm from the 18mm MDF to place the...

Hi everyone, I had a leak in my CH pipes running through my kitchen. Pipes have been replaced - not only the damaged section, but we ran new pipes up to the radiator as it turns out when this radiator was installed last year, the flooring guys filled the channel with concrete. My concern...

I am about to lay a patio in my back garden and I have to do the fall towards the back of the house. I am putting channel drains across the back but I'm not sure how close to position them to my back wall. I'm working with three options: 1 - flush against wall 2 - a few cm away from wall so I...

Hi all, I have issues with damp appearing on the inside of my walls. I have read through some of the other topics on this forum, and I believe that I will need to create a channel (4" wide) along the side of the concrete floor/wall in order to stop the damp from appearing internally...

Hi everyone, I'm new to the forum and this is my first post. Just wondering what type of sealant you guys recommend for sealing the back of an outdoor weatherproof light switch box against a wall? Preferably something sold at screwfix as there is a store close by. The lightswitch enclosures...