Thinking about getting a cordless 190mm circ saw, cheapest Makita one I can find is the https://its.co.uk/pd/DHS710Z-Makita-DHS710Z-36V-Twin-18V-LXT-190mm-Circular-Saw---Body-_MAKDHS710Z.htm?gclid=Cj0KCQiA-62tBhDSARIsAO7twbYfaHalD2KjBksAhmrgFdvyDjCqenFb9qT8DCrOBIIA2NYoz_dWH3waAiV_EALw_wcB...
Hi,
I'm looking for a decent electric screwdriver thats up to the job of assembling eg aluminium bolt/screw garden things, flat packs but also fine work eg pc repairs etc. ie needs decent torque adjustment and power.
As compact as possible for getting into awkward spaces.
My current favourites...
Anyone got the “Titan TTI855PRW 22bar 18V 5.0Ah Li-Ion Cordless Hand-Held Pressure Washer” and can comment?
Just wanting it for basic car washing. Is a spare battery available to buy can’t seem to find one.
Can you put the hose either in a bucket, or if want attach to a hose?
Can you buy...
Hi all
Been looking at a new combi drill and have a bit of a dilemma. Got 3 options...
Dewalt DCD778 with 2 x 5.0Ah batteries and case for £153. This is a brushless drill, 65Nm torque and 1750 rpm.
Dewalt DCD796 with 2 x 2.0Ah batteries and case for £134. Similar to above however it is...
Hi all
I have a lot of bathroom furniture to fit onto a tiled bathroom. The tiles are ceramic.
I have already drilled a few holes in the tiles but each hole takes ages to drill! I haven't timed it but roughly around 10-20 mins per hole. (Each hole is 8mm).
I have two drills.
One is this...
I'm going to run the ducting for my cooker hood through the kitchen wall.
It is 150mm, so I need to core drill a suitable size hole in the cavity brick wall. I always try to use rigid ducting if possible, so I was planning on using this...
As i'm now considering getting some sitework after doing renovations and general building for most of my building career (luckily) im just in a quandry about exactly what tools and gear to buy/invest in, to do 1st/2nd fix on todays sites.
Currently i only have 240v gear,i saw an ad for some 110v...
Hi, need to get a decent cordless.
I will be using occasionally but need to prepare drill concrete with 5mm bits and then drive 6mm screws into it thereafter - that task will be quite common and the concrete will vary in strength so need something decent to cover me.
Ideally I will have a...