I have used Tourpreet to make good before. But, needed to fit a necked bolt to secure a door. Trouble is I canot drill, let alone screw into part...
Hi All, We had the front of our bungalow rendered in the autumn, covering the pebbledash. It has survived the winter okay, no cracks and looks...
Hi folks could someone recommend a filler to use before I sand down and paint a bed I've just made from CLS
Currently prepping wall panel moulding for decorating and there are dozens of second fix brad nail holes to fill. Been using Ronseal 2 part wood...
Hi. I stripped the first layer of the plasterboard wall near the external lower part of the shower door due to mould. Would someone know which...
Hi everyone, Probably a silly question, but I can't find an absolute answer and I want to check before I start ordering stuff. So, I'm putting...
Hi everyone! I've moved into an old house and have a variety of gaps - some where old filler/caulk/something is cracked & receding and other...
Hi, I have had separate a plasterer and carpenter in, resulting in a visible edge of plasterboard next to the door architrave. Image here:...
Bought this stuff from Screwfix two years back in 2019:...
Hi I have removed some wood rails from my hallway walls and they look terrible so I was going to skim or filler them also the corners are all over...
I recently lined my new bungalow with 1200 lining paper and cut into the corners. I ran a very very small bead of Brewer's Ultimate caulk...
Removed a shower and tiles recently and removed some loose plaster that had blown. My question is how best to tackle this hole to fill in. Do I...
Hello, I’m about to start some light renovation work which includes filling settlement cracks and gaps in a new build and I’m looking for the...
I have a window pole which sits on a boss, which screws on to a plate, which itself is screwed into a 170 year old brick wall, via rawl plugs etc....
I'm looking to repaint our kitchen walls but looking for some advice on the best material to deal with a hairline crack we have going down the...
Hi, I have a network socket next to a double socket (ran in separate conduits down the chase, don't worry). I got a plasterer in after the...
Hi As part of doing up our kitchen we’ve taken off the windowboards so we can level it all out (3 separate windows)! It looked so bad esp after...
Hey, Just installing our kitchen at the moment and from the drawings we never caught that a wall unit would be 5cm over the hob. Looks like...
Hi Is they an external filler on the market for repointing external brickwork prior to painting with Sandtex. I have a quite a few crumbing joints...
Hi everyone, Hoping to get a little advice please. My car port has not been touched for a long time, I have been carrying out wood repairs and I...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
