Hi all, I’m a diy-er, hopefully getting close to finishing my conservatory/orangery build. I just want to check my plan for the floor is...
Hi there My mate has a takeaway & the kitchen vinyl flooring has some patches which needs repairing. He has spare leftover vinyl which he plans...
Extending room ( knocking down wall ) and having a bigger kitchen over the bigger room. At the minute the kitchen is tiled and the room next to it...
The kitchen in my new house has these old floor slates which are cemented down (photo below). I'm clueless as to what to do about them, a few are...
I'm fitting herringbone flooring, real wood with 3mm wear layer and overall 10m thick. I've left the recommended 10mm expansion gap all around...
Hi, I'm installing white marble Finish lvt and under floor heating. While installing there's no gap between the two planks but after heating and...
I saw a parquet herringbone engineered oak floor and the supplier has it in 10mm thickness or 14mm thickness. He said either doesn't matter but...
Pulling up the carpet in my new home and found these brown tiles in the hallway. [IMG] [IMG] Looking to lay laminate flooring but worried they...
Pulling up the carpet in my new home and found these brown tiles in the hallway. [ATTACH][ATTACH] Looking to lay laminate flooring but worried...
Hello I've posted about this before but slightly different plan this time. I have concrete subfloor in an old house . I don't have enough...
Hi guys, Just wondering if I should just lay the boards and screw them, I've heard you have to glue them with something. What glue would you...
Howdy folk. Got myself into a bit of a pickle, looking to put a floating floor with 100m PIR into my porch. Used a liquid screed "self...
Howdy folk, probably a simple question and i'm sure i'll be slapping my forehead in no time. Looking to level a concrete porch slab in order to...
Hi, please could someone shed some light on this situation as I’m getting confused. I have a 1950s house with no DPM. Instead it has an...
Hi, Ive just had a wooden floor laid in my kitchen. The builder charged me extra for levelling the sub-floor before he laid it. I went round to...
Washing machine makes loud knocking noise on 1400 spins (transport bolts are out and machine is level) I have 12mm laminate on 5mm foam underlay...
Hi, I am in the process of fitting engineered wood in my bedroom, on the existing floor boards. I have fitted the underlay and I am 90% complete,...
Hi, Do I need to prime the underside of the subfloor before putting it down? and if so what do I prime it with? Between the floor joists I've...
Hi guys, I have a moderately small 2m x 1m enclosed porch with a concrete base and was wondering what products tiles or laminate are DIY friendly...
Hi, My floorboards aren't the best and creak a bit. Some have been cut to get access to pipes and cables and I don't think I'll stop them all...
Separate names with a comma.