Hi, Around 6 weeks ago we had a section of our cold mains pipe shortened as it was running over the floor boards within the loft and was...
Our water main comes straight in under the sink. We had a new mains fitted last year. It then splits 5 ways going to: 1. Outdoor tap 2. Kitchen...
I have an old Baxi wall mounted boiler open system that I keep repairing. New pumps etc. The system works well on gas, having been flushed and...
Okay so I went and purchased this nice Grohe Bau Curve Kitchen Mono Mixer Tap and I knew it came with 6mm bore flexi tails which was fine because...
1 Radiator not working, checked some forum tips and Ive ended up replacing Radiator, TRV and Lock Shield, as they were all very old, this did not...
Got a few options for a non-solderer like me, for getting drain down valves for the 22mm flow/return: 1) Self Cutting Drain Off Valve 15mm with...
Hello I was hoping if I can get some advice please. I have a theee bedroom terraced house which has a shower on the ground floor and a bathroom on...
Ok chaps and chapesses, I have a DHW loop flow rate issue. The whole loop is 22mm copper except for the pump which is 15mm. The circulation pump...
I am looking to reduce the heating bills and I have already got a new baxi combi boiler, plastic 22mm/15mm pipes, large radiators and plenty of...
Can anyone explain the 'flow and pressure' spec of showers? Example: 2 litres per second at 0.7 bar. Fine but AT WHAT TEMPERATURE?! I'm looking at...
Hi could someone please advise. I've built an extension and I'm at the point of doing the heating. I've got two new vertical radiators and a...
Hi all, I've just fitted a salamander Force CT 30 SU in the airing cupboard to boost the pressure to all the hot taps in the house. The pressure...
Just having a new radiator fitted. Plumber has joined the new radiator to the boiler 22mm main ring which they have T-Off to the return side of...
Hi all, I hope you don't mind me asking on here as I'm not a plumber but a customer who is trying to get her head around what she's been quoted....
Hi all, We've had an ongoing problem with a mixer shower on the 1st floor for the last 6 months in that the temperature ranges from cold to...
Can anyone advise if I can use the existing 10mm pipework feeding the radiator and basin and extend it to feeding the combi fed shower? In total I...
Separate names with a comma.