gripfill

Wondering if there is any point or need for priming/sealing the unexposed bare side of MDF skirting boards like back, bottom and sides? Will sealing the back affect the use of an adhesive like gripfill? Make it grab better perhaps and stronger?

A little confused here. When using solvent free adhesives the tube says one surface must be porous. Like the no nonsense one and even grip fill solvent free: https://www.screwfix.com/p/no-nonsense-11665502-grab-adhesive-solvent-free-white-310ml/87451 Now when fixing wood mouldings, dado rails...

Hi guys just wondering what the screw spacing should be for sistering some 4x2's onto my existing joists to level the floor. I'm using these turbo coach bolt screws- https://www.screwfix.com/p/turbocoach-coach-screws-yellow-zinc-plated-8-x-100mm-50-pack/78121 and gripfill adhesive. Cheers

Hi All, First post here. My house was cheaply constructed in the 70s using paramount board for internal walls (two bits of plasterboard sandwiched with cardboard lattice in between) which has no studs. After considering a few options for hanging kitchen cupboards, an experienced handyman...

My partner wanted our new kitchen to have that classic look - so we bought some MDF tongue & groove panels and I trimmed them to size and and had them sprayed up to match the colour of the units. Now I've come to fixing them, and not sure of the best approach. Some of the boards are slightly...

Putting in 1200 X 1200 mm Shower base for wet room (flush mounted on the joists) there are about 3 mm gaps in certain spots the base is the extra strong to lay directly on joists would Gripfill or similar fill pp the gaps and offer good area of support. Its an old house and the area has many...