My outside kitchen drain is blocked with what feels like cement/concrete. I can get my hand on it and the whole pipe is blocked and is solid. I’ve...
One for anyone with sink experience, Putting a sink in, the sink itself is in to the worktop and things are moving forward ok, piping going in but...
Hi guys I’m looking for a bit of advice, I’m after building a single block shed out my back garden, and the walls feel wet all the time when it...
We have been to view a house and love most things about it. Gives us all space etc we need within budget BUT.. has a very steep driveway which is...
Looking to identify this shower trap so I can buy replacement dome and flange as builders used one from a different waste which doesn’t fit...
Just moved into a home with wood chip wallpaper and I'm needing to paint it. So far I think I've established that I need to use old based primer....
I have a new build (10 years old now) installed I have a Ideal Logic 15 boiler connected to a Range Tribune HE Unvented Hot Water Cylinder and the...
Hey guys, So an occasional poster to the forum and a.complete DIY guy, not a professional plumber. But I am the type who wants his house to be...
A quick google tells me this error code means: "The flue-gas STL (flue-monitoring device) or the burner thermostat has detected too high a...
Help, I changed my 2-gang switch in my room to a single gang with a hue wall switch, so basically from the photo below the two pairs of brown...
Hi all, I have recently wall mounted my TV in my front room onto a dot and dabbed wall. (photo attached) You will see that I'm currently using...
This is the ceiling in the bedroom across the hall that needs renovating. there are dark patches and a long dark strip along the edge of the...
Hi there, I’ve had to temporarily remove some lighting cables to sister a joist. Whilst disconnecting them I realised that a lot of the grounds...
I have to cut three t&e cables to remove them from a ceiling joist hole so that I can attach a sister joist (with a matching hole for cables in...
Can't say I've ever seen the washing machine waste plumbed in like this. https://ibb.co/M7pgP33 This has got to be a dodgy DIY job or some rogue...
Just moved into a new house, where the previous owner was a bit of a DIY buff, where he did things not quite right. Trying to work out the most...
I'm wanting to core hole in wall, so that this extractor can be vented externally. I've circled in red where planned hole would be. As it's...
Hi, I would like to ask about what would be a good way to insulate the loft. The loft is not heated and you can feel the air coming into the loft...
Used the Vitrex Lash Tile Levelling System and when I’ve come to take the spacers out some of the are stuck. I’ve tried tapping with a mallet,...
Hey guys, New to the forum, so apologies is any newbie faux Pas. My PHG Greenwood Airvac CV2GIP Extractor is not working. It stopped working a...
Separate names with a comma.