Hi all,
does anyone know how I access the light bulbs of my extractor fan? I have taken the fan cover off but the bulbs are behind the glass part in the photo. When I try and remove the glass bit it doesn’t budge. Any tips?
Hi guys,
this may sound really thick but the lightbulb to my extractor fan in the kitchen has gone and I’m trying to replace it but I can’t figure out how to get access to it. Does anyone know how to remove the glass without damaging it?
I’ve tried to budge it, push the clips in, get something...
[L Have just had worktop’s replaced in kitchen due to flood damage and where the joints meet there is a very visible white line across the length of the joints (see photos) now these are the exact same worktop’s as previous and the joints were invisible, it actually looks a lot worse than the...
I'm looking to replace the countertop corner and edge trims. They are 40mm size with approx 10mm radius. I think I need a double bull nose radius.
Does anyone know where I can get this specific size but in black?
Thanks
Anyone had any experience with fitting for wren?
What is the pay like?
What are they like when it comes to paying?
I was at a job doing some bit and lads from wren turned up with the showroom manager to install the kitchen worktops got chatting and they said they are desperate for installers...
Does anybody work for Wrens, Wicks or B&Q as a subcontractor for fitting their kitchens?
Wondering how you find them to work for?
Best things that work well.
Complaints/problems.
Would you recommend working for them?
I'm kitchen fitter currently working via BIKBBI, and work for Wrens -...
Hi All
Currently looking at kitchens and kitchen reviews whilst trying to decide which brand. It's a minefield...
Wren seem quite good but the services/sales seems pushy.
Howden looks great but are very pricey especially on appliances.
And, wickes seem average but are very competitive on...
I have a tall roller shutter unit on the kitchen which got stuck. I cannot open it more than 30 cm and then it rolls down (photo attached) so I cannot access the shelving behind it. The kitchen is 11 years old so out of warranty but I got the manufacturer's drawings for the unit (pdf attached)...
Hi guys, I'm wanting to replace my hob. However I had an acrylic splashback installed several years ago with a glass heat proof panel behind the hob and this has reduced the required 50mm gap from back of hob to wall to now 35mm. I've been looking at the installation guide for several hobs and...
Hi. This is my first post. I hired a kitchen fitter and had supposedly finished the job. I wasnt happy with it but my question is do you always have to use worktop filler (its oak) for the joints (mitre joint) or have I had the wool pulled over my eyes?
Hi Guys,
I’m new on here and I am looking for an experienced fitter who can fit Alusplash Aluminium Spalshback in Ilford?
Any recommendations would be welcomed.
Thanks
HI All,
I have a bit of an issue at hand. The story goes like so, This customer wanted me to take on the works to supply and fit a kitchen and redecorate a full house. In the end he only gave me the works for the supply and fit of the kitchen and gave the decorating job to some other guys to...
I’m new to the kitchen fitting game. It’s. Le come to worktops and I’ve been watching my trainer loads. And videos. I keep practicing at home. I till it’s my turn on site. But I can never seem to get the joint right
Any help?
With the female it’s always right! (Hard to get female wrong)...
Hi,
We want to take off existing U shape kitchen Laminate worktop with a chamfer corner for hob and install a new Laminate worktop with exact shape and size, plus an additional 2 meters of worktop to serve as breakfast table. We don't intend to move location of sink or hob but are planning to...
Right, here goes.
We are looking to replace kitchen worktops, the ones in situ look to have a diy “extension” to them (im saying look to have, they blatantly have ), and the units and tiles have been extended along as well.
This now means that the U shape (with 2 joins) at its two longest points...
Dear All
Just looking for a fitter of the thin 12.5mm Zenith worktop that I have purchased from Wickes.
There is one cut 'L Shape kitchen' and an undermount sink and a electric hob that needs cutting in also.
I am based near Hitchin, Herts and the worktop will be ready to be fitted...
Hi All,
Looking from some seasoned professional advice...
What should I expect to pay for labour only when fitting a new kitchen? Below is a list of jobs I need doing...
My kitchen is a bit smaller than 10ft x 10ft and I'm looking for a 'U' shaped layout.
Removal of current kitchen.
Knocking...
Hello,
My parents bought a kitchen and all of the appliances from Anglia Interiors in Huntingdon. They have been sold a telescopic extractor fan which is designed to be supported in a 600mm wall unit (remove most of bottom of cupboard and it screws into the sides). The problem is that they...
Hi all quick question , i am putting together the pan drawers on a 500mm base unit bottom 2 drawers went together fine top standard drawer has metal rear panel which i cant work out how it goes together, instructions no good as they show bracket and wood panel. Its driving me nuts as this is the...
hi... I'm looking for information from customers who have had dealings with TPD / DPT Interiers Colchester..this company formally Conway interior/ interior design has set up again using a different trading name.
This company is run by Sean Conway and Trevor Howard...this company has been trading...