kitchen

Hi I have moved into a house and looking for advice on kitchen window sill and how to fix it. I previously had tiles on the window sill however the grout started to crack and the tiles started to lift. we have taken everything off back to brick and it is a bit damp, need some advice on how to...

Hi I wonder if anyone can help or point me in the right direction. I want to add an induction hob on a kitchen island and I have an open plan kitchen as well and I understand that an extractor fan would be good as it will get rid of smells etc... the questions that I have are 1. Is a downdraft...

I have recently bought my first house and just started renovating it. Complete novice here and would like to know which appliances these pipes connect to. Thanks in advance

Hi Everyone, I'd like some advice based on the collective experience here! We're in the process of purchasing a fantastic two bedroom raised ground floor apartment in a four-storey Victorian conversion. Two of the rooms are huge with great proportions, original features and 3.4m ceiling height...

Hi, new to this forum. Need some help undoing a Horus France bridge mixer tap to replace a leaking cartridge. Please see pictures attached. Would love any advice on how to undo the gooseneck screw and the taps! Many thanks in advance. Daniel

Hi everyone! I am getting a kitchen worktop fit and there needs to be a joint in the worktop, I want it to be really unnoticable so thinking of putting it inline with one of the edges of the hob - is this acceptable? Or is it a mistake? Thank you!

Hello, I’m trying to understand what type of damp issue I have in my kitchen and how to best resolve it. The kitchen has three external brick walls and one wall in particular has the worst mould problem behind the unit and now also has paint peeling off with white crystals coming off the wall...

I was hoping to lay some laminate down in our kitchen diner which used to have carpet in the dining section but laminate in the kitchen. After removing the old carpet and laminate I have found that the kitchen has a concrete floor but the dining room has wooden floor boards. I have left the...

Hi there, So I have thrown several methods of drain cleaning from each side of the sink which has improved the issue but it still persists. When draining larger amounts of water from the kitchen sink, or when the washing machine drains out, water starts backing up and coming out at point one...

Hi, I've removed a cupboard unit in the kitchen so I can put a dishwasher in. The space is next to the washing machine so the bench top now has 112cm with no supports above the washing machine and dishwasher. Is this alright or do I need to put some sot of support in? It's a plywood bench top...

Hi guys, Recently had a kitchen fitted which has been fairly stressful. We have managed to rectify many things although I am concerned about the edging detail on the work top. How easy is it to take the edging strips off once glued and replace with new/better cut ones? This is the finish...

Hi, Just finished fitting my kitchen and wondered what products you use to get a good final finish/am I right in my thinking. Want to know which product and a recommended brand for each please!! - Ash worktop to ash upstand seal (clear silicone? I have Dow Corning) - Ash upstand to white...

What's the average cost to replace a single worktop (I already have this) and put 3 cupboard doors on in a kitchen (which I also have)?

We are housing association tenants and have an Airtech Solutions SA25 extractor fan installed.... and it is poor, i mean really poor.... rated 90 m3/hr. Here's a link to the fan spec - https://www.airtechsolutions.co.uk/wp-content/uploads/2019/06/Airtech-SA25SELV-Product-Datasheet.pdf It's...

My partner wanted our new kitchen to have that classic look - so we bought some MDF tongue & groove panels and I trimmed them to size and and had them sprayed up to match the colour of the units. Now I've come to fixing them, and not sure of the best approach. Some of the boards are slightly...

Can I use Soudal sealant for base of kitchen splash backs ? I'm removing my glass splash back panels from my kitchen worktop. They are screwed in place on the vertical walls and I need to replace the silicone clear sealant at the bottom where the glass meets the laminate kitchen worktops. I...

We are replacing our visor cooker/extractor hood. There are a million models, options etc. And then I need to make sure I can get the right ducting kit. It would be easier to choose the hood if I knew that whatever hood I go for, I can always find the right ducting kit, as long as the diameter...

We have a small café and are in the process of purchasing a double stand up fridge and a single stand up freezer both are 1900mm high and my question is will they run off the 2 existing 13amp fused spurs that we already have or will we need heavier supply cables to the consumer unit. Thanks in...

We have a Housing Association mid-terrace house, kitchen is 3.2m x 2.1m. Our problem is we are forever having to wipe grease off the walls. We have a humidity extractor fan on the ceiling near the exterior wall which extracts outside. We've asked for a more powerful one, but the housing...

Are these universal? So many for sale but will anyone fit or should I get a frankie kitchen sink plug? Mine has lost the catch so falls in blocking the water so don't say in drain position. Thanks