I have cut out a section of 4 inch clay soil pipe to insert a 460mm plastic chamber, so I need to convert the clay to plastic both sides of the...
Hello, I'm currently mid way through a bathroom renovation, doing what work I can myself. One job I thought best left to a professional was to...
Hi all! Looking for some advise on moving a rad pipe over 50mm. I'm looking to install a new radiator which is larger than the previous. I need...
I'm going to be carrying out some pipe work in the bathroom (installing new bath/sink taps, with new plastic pipes). My plan is to turn off the...
As I'm 100% new to owning a house I would like to learn a little rather than rely on a plumber for simple repairs/upgrades. The pipe on the left...
I'm having some walls knocked out in my house to create a large kitchen/diner and utility room. My original builders bailed on the job due to...
I'm looking at putting strainers on the cold water inlet to a property. The reason is to improve the water quality using simple and long lasting...
Bit concerned it might be lead but can’t make out as it’s quite rusted, and also could it be gas? We have copper hot / cold and copper heating...
Any idea if these 15mm tails https://www.toolstation.com/650-isolating-radiator-tails/p57561 Will fit this radiator...
I've run a bunch of pipework (Polybutene - PB) for central heating and hot water what will be under a concrete slab and while most of them are...
Hi, I'd like to remove the tap shown below, cut the pipe close to the wall and then run the pipe under the decking. [IMG] Then run the pipe to...
Hi I am trying to build a manhole chamber with sump on the cheap. To buy a proprietary unit is to much money. If I simply but manhole chamber...
Hello, I hope someone may be able to offer some advice. I recently noticed some staining on walls in my flat. I live in a ground floor flat...
Hi I recently got new radiator installed. After 2/3 one of the radiators started making a loud noise like a drill or some hammering. I finally...
So I had the acova 3 column radiator from Screwfix fitted yesterday. But I believe it has been fitted the wrong side. Instructions manual clearly...
Hey! I've just purchase a house and am looking for some advise... I've demolished a built in wardrobe / airing cupboard and when looking to...
I completed on a stone cottage last week that is going to be our future family home. Its in Yorkshire and was build with standstone in around...
Hi, I live in a Victorian terrace which is around 120-140 years old. I have this pipe in my shed which is leaking (see links to photos)....
I'm intending to install a shower pump. The supply pipes come from above but the feed pipes to mixer tap will go under the pump. Will attaching...
Hi all, I'm looking to replace the taps of a small sink, they are currently connected by brass pipework, which may not fit modern new taps and is...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
