Hi, I’m planning on removing the fibreboard ceiling tiles throughout my entire upstairs and replace with plasterboard. I’ve looked in the loft...
I'm converting an old double concrete sectional garage to a workshop in my own garden. The idea was to attach 50mm square battens to the vertical...
Half my wall was lathe/plaster but had blown and effectively just fallen off exposing the stud wall. The other half of this wall is a solid...
Hello there. Have found a cover from a plasterboard tile inside the loft flap down exposing the plasterboard. Also over the summer from one side...
Hi all, I have a wall made up of plasterboard insulated with polystyrene (c30mm). I'm looking for some advice on what fixtures to use to hang two...
Just wondering if anyone has got any link to someone selling plasterboards. I need around 3 pallets. Where's the best/cheapest place to buy it...
Hey Everyone, So I have skimmed plasterboard before and can do that pretty well. But I had a partition put up and that was boarded and skimmed....
Hey everyone I’ve had builders install 3 beams in my house. A vertical column then an I beam resting on the column one end and resting in the...
Hi. I have a bit of a dilemma. I am boxing in some horizontal pipework that runs along the wall near the floor to a radiator. I am running some...
I've installed the framework and in the past used 9mm as it is lighter and easier to handle. Do you think there is much acoustic merit to using...
Hi, I am completely renovating a 1950s property and doing a lot myself to save on costs. I need some help with what I should be doing regarding...
Hi, We're going to be installing some brickslips onto a newly plasterboarded wall. We're unsure whether or not the wall should be skimmed first,...
I recently took out a Pellet burner in corner of internal room that heated water and had flue and plumbing pipes boarded over with plasterboard at...
I levelled out the ceiling using a laser level and new plasterboards. It was more or less flat and level against a straight edge. Had the whole...
We’re putting spring toggle spring hooks into the ceiling to hang plant pots. We’ve drilled a hole that’s about 8cm deep, but still haven’t...
Is it okay to screw standard plasterboard onto MDF using normal black drywall screws or better to use an adhesive? Its only a thin strip of...
https://www.screwfix.com/p/capital-valley-plastics-ltd-damp-proof-membrane-blue-1200ga-15-x-4m/98181# Have a good amount of this membrane left...
Can you use foam adhesive to stick foil backed insulated plasterboard to solid plastered walls? Has anyone tried? I have found 3 products, Insta...
I plan to fix insulated plasterboard to this cold solid wall. Everything will be fixed and sealed off using foam adhesive and acrylic sealant on...
I am deciding which insulated plasterboard to get for my solid wall insulation so would appreciate input from anyone who have fitted these before....
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
