Hey there, today I noticed a very strange mark on our ceiling which looks like a leak however to my knowledge there are no pipes above it as it’s...
Hello, I hope someone may be able to offer some advice. I recently noticed some staining on walls in my flat. I live in a ground floor flat...
Hello Everyone, Looking for help and advice. Just moved into a 2 bed 2 bath flat with no access to gas so everything is powered by electric. In...
Hi All, I am not sure which T connector to use to add a bidet sprayer under my flush tank. I have pipe below the flush tank which has 15mm...
Hi all, hope to get a part for this shower tray trap as it’s leaking all over floorboards upstairs when in use. Can anyone suggest what part to...
Incredibly grateful for any help! The toilet is wall mounted, hidden screws, no easy release button, no grub for alan key. Not got a clue how to...
Hi wanted a bit of advice. I thought all waste pipes needed some type of trap U bend, P bend, S bend etc.. I pulled off the bath panel and...
Recently bought a house which we are renovating, took off the plasterboard covering the fireplace to find what we think is an old back boiler...
Hi All, just after some no doubt basic help. i have a 3/4” 15mm Flexi Hose Connector under the bath from the new tap (current to nothing) Up...
Hello, I'm just after a bit of advice. I've recently bought a 3 bed semi in dire need of updating. Currently there is a lead mains pipe, and to...
hello all, i have just got a plumber around to replace a new basin waste. However there is always a bit of water collection around the waste...
I just bought a house that has a very basic MEP2c DUAL CHANNEL PROGRAMMER controlling the heating (hot water is separate), the boiler is a...
1 Radiator not working, checked some forum tips and Ive ended up replacing Radiator, TRV and Lock Shield, as they were all very old, this did not...
Hi I am looking for a gas valve that would fit a Glow worm conventional flue boiler 45/60 or a ITT McLaren valve
Hello, I had recetly fitted a new sink tap. It sits on the sink well and the sink is put in place by a brass flange nut that was provided with...
Hello I am looking for advise on the best way to project manage the Reno/reconfigure of our kitchen if anyone can advise? We are due to complete...
Hi All, I am looking to replace my kitchen taps - the current setup is two cross-head taps either side of a swivel spout. They are all...
Hi guys, So customer complains that rad in extension hasn’t worked since being installed, the pipes run behind the dabbed boards through the...
Hi guys, I have got this shower plate but the thread doesn't match with the shower bar. I have tried several times to screw but its just not...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
