Hi all. Doing a project at the moment with wiring a garden room up. No issues with doing the internal wiring in the new CU there as only doing a...
Hi all, I have a question that I am hoping can be answered here and hopefully I make sense when explaining. I have a ring circuit feeding the...
Hi all, hoping for help sizing a new electric cable. The cable will run for 25m internally (direct from the CU), then 75m underground to the top...
Hi all, wandered if i could get some advice. I have a shed 10 metres from the house which i would like to add two 13a sockets and a lighting...
The previous owners of our house had a hot tub, with a dedicated supply, and a small external consumer unit in proximity to the tub. That unit...
Hi, Hoping someone can help me. I am looking to add power to my shed, which is about 20+ meteres away from the house. I will be using the shed...
Hopefully a yes or no answer. I'm going to run some SWA cable (without connecting it up to anything, a spark will be doing this), under some...
I'm planning a small off-grid micro-hydro system. There will be a 10mm2 4-core cable for the alternator output and a fibre optic for control...
Hello just wanting a some advice. I've recently installed 16mm SWA cable to my garage. I"m after installing the following into the garage and...
Hi guys been a while, I have a customer asking for quite a large outdoor lighting and power installation It is going to have a kitchen area...
Just watched a video on YouTube by the good lads at eFIXX. They did a good video on the Tuff sheath cable. Just curious as what clips you would...
I am planning to run a SWA from a spur to a consumer unit in a shed. The ring main the spur is coming off is a separate ring main in the extension...
Hi All I am looking to get a new gland for an SWA cable. I think it is a 1.5mm2 4 core so need a 20s? Have a look at the photo if it helps If it...
I will probably get a professional in to carry out this work but I am just starting out on a basic electrical course and so am trying to educate...
There is an existing supply to my shed with a three core SWA. I want to run a SWA cat5 to the shed also, and the easiest option would be to follow...
Greetings, my wife would like a double gang socket in the potting shed for her heat mat for the plants and other very low voltage items with no...
My garage is fed from a FCU via SWA to an old isolator box (big switch big grey box) and then to a light and socket. I would like to add a couple...
Hi, I use the garage as a workshop for my DIY projects. Currently it has a 16 amp supply which trips every time I run any kind of load on it (eg...
I'm currently building a workshop at the end of my garden and just planning my electrics. I will be getting an electrician in to do most of the...
Swa cleat size come as Cc5 Cc6 Cc7 Cc8 Etccccc.. what size cables do they fit? Thanks for the time
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
