110v Vacuum ("dust extractor") AKA Hoover to use on site

Discussion in 'Tool Talk' started by AlvyChippy, Nov 7, 2017.

  1. WillyEckerslike

    WillyEckerslike Screwfix Select

    Sorry if I've recommended something and it's not performing for you. Mine seems to have better suction than my Henry, is class M, has the power take off and is quieter than my Earlex but everyone to their own I suppose. I use it with the cyclone separator I made and it's fine for planing and routing (hand planer, not jointer/thicknesser) so hopefully you'll get some use out of it.
     
    AlvyChippy likes this.
  2. AlvyChippy

    AlvyChippy Active Member

    mate,
    no stress!, most likely it's me, with ever so high demands for (tight as ducks a4se) budget ;)
    it does have Auto start (not tested on any bigger tools), but it says 750W take off...
    will try that tomorrow! :)
     
  3. AlvyChippy

    AlvyChippy Active Member

    Will post tomorrow, as never had a chance to get it on site today.
     
  4. AlvyChippy

    AlvyChippy Active Member

    Had it today "humming", when was drilling studs to the old wall, but having no adapter- laughable it was! :D

    my 900w SDS kept kicking in (on a sticker it says can handle 750W) and I had it connected to my new 5kwa tran 32a socket via reducer (yellow big in to yellow smaller)...

    Ordered 4 more bags, as existing will not last unless, I will try to empty it.
     

Share This Page