Cable size for fused spur

Discussion in 'Electricians' Talk' started by Chunkymunky1988, May 20, 2023.

  1. Chunkymunky1988

    Chunkymunky1988 New Member

    Morning, i bought a fused spur yesterday to feed power to an outside light which has 2x 3.4w led bulbs in it. The cable from the light to the spur is 1metre of 0.75mm flex and i have put a 3a fuse into the spur. Before connecting the spur into the plug socket below am i right in thinking that the feed cable from the plug to the spur needs to be 2.5 t&e? Cheers
     
    Chunkymunky1988, May 20, 2023
    #1
  2. sparky steve

    sparky steve Screwfix Select

    Yes. The spur must be connected to the existing circuit using the same size and type of cable as used in the main circuit you're spurring from.:) IMG_0551.jpeg
     
    Last edited: May 20, 2023
    sparky steve, May 20, 2023
    #2
    Chunkymunky1988 likes this.
  3. Chunkymunky1988

    Chunkymunky1988 New Member

    Brilliant, I'll make sure to do that then, cheers for your reply :)
     
    Chunkymunky1988, May 20, 2023
    #3
    sparky steve likes this.
  4. Bob Rathbone

    Bob Rathbone Screwfix Select

    You must check to ensure that the socket you are connecting to is not a spur off the ring, but is connected directly to the ring. Everything else is fine.
     
    Bob Rathbone, May 20, 2023
    #4

Share This Page

  1. Dismiss Notice