Do I need hinge tite screws for butt hinges

I think the issue is in the hinges.

I found quite a few of and about the three inch size that come with a variety of engineering finishes. Some came countersunk, some just with a straight hole. Some are that thin they are seemingly punched through. Some will have a no8 proud, but let a no6 have no hold.

Eventually I found what worked for me and paired up both the hinge and the screw accordingly.

 

Well done, probably best not to buy cheap hinges, glad you sorted it.

 

By his absence it really does appear that HA has realised he is in the wrong.
Does he acknowledge this or slink away silently.
Wot a twot

 

Poking the fire are you?

 

HA is now Chips beach

 

Beach or bit....
I'll leave that there

 

A couple of days ago I was a "so called carpenter" and didn't know what I was talking about but now "Mr I'm always right" has realised he isn't he hasn't done the man thing and accepted it and apologised but has buggered off. What can I say.

 

Eventually I found what worked for me and paired up both the hinge and the screw accordingly.

Says it all chippie.

Mr. HandyAndy - Really

 

So still not going to do the man thing HA?

 

I'm waiting for you to do the man thing.

And admit there's ALWAYS an alternative.

Mr. HandyAndy - Really

 

So to clear things up.
You are both waiting for the other one to do the"man thing".
Mmmmm

 

Doubt there is much rush to do so.

 

There is always an alternative to doing things the right way, it's called the wrong way.

 

Come on handy admit it.
Bow down to chips superior knowledge and stop being a muppet

 

dwlondon said he found what worked for him, and you congratulated him.

Look, if it don't fit use something that does. THAT is the solution.

Mr. HandyAndy - Really

 

His solution was to buy new hinges not wrong screws.

 

Well now you put it like that

 

That didn't make sense.
Chip you slipped in there

 

I've just noticed the person that posted about buying different hinges wasn't the OP

 

Brilliant