Dyson Ball DC25 – rear castors stay elevated

Discussion in 'Tech Talk' started by Mike_T, Jun 28, 2021.

  1. Mike_T

    Mike_T New Member

    You usually place foot pressure on the red lever piece, and down come the grey casters, but not anymore. They’re stuck elevated. Any ideas on a fix?


  2. sparky steve

    sparky steve Screwfix Select

    Silicone spray all the affected parts to see if that frees off the said part.
    Mike_T likes this.
  3. jonathanc

    jonathanc Screwfix Select

    There is a spring clip on the right hand leg: inside. I bets it’s come off or loose
    sparky steve and Mike_T like this.
  4. Mike_T

    Mike_T New Member

    Sorry, I’ve been busy. Just to say I did see your replies, both appreciated. I wanted it fixed fast, and was recommended a guy just 5 mins from me. He diagnosed that missing spring and fixed it PDQ. Thanks again.
    sparky steve likes this.
  5. jonathanc

    jonathanc Screwfix Select

    Great news. Hope he emptied it too- looks pretty full in those pictures

Share This Page