Erbauer Ero400 backing plate query

Discussion in 'Tool Talk' started by Chris Staddon, Jul 14, 2021.

  1. Chris Staddon

    Chris Staddon New Member

    Hello, I have an Erbauer ERO400, and want to change the backing plate. The original one has lost its grip, and the sanding paper keeps coming off.

    The base plate has three fixtures but the Allen keys don't fit. Is this a non standard fitting and if so, how can I remove it?

    Thanks
     

    Attached Files:

  2. ElecCEng

    ElecCEng Screwfix Select

    Try a torx bit. The splines might engage into the corners if you’re careful.
     
  3. BillyBobToo

    BillyBobToo Active Member

    Have you tried Imperial Allen keys?
     

Share This Page