Help with Light Switch Plate

Discussion in 'Electricians' Talk' started by Fuelledbytea, Feb 14, 2020.

  1. Fuelledbytea

    Fuelledbytea New Member

    Hi,

    I have a metal light switch plate to replace our old plastic one, but I'm not sure how to earth it. Do I just strip the earth wire and use it?

    Any help would be appreciated.

    Picture of current switch set up
     

    Attached Files:

  2. greenback78

    greenback78 Active Member

    Yep - looks like you have two earth wires with a sleeve on them. Just push or cut it back a little to connect to the terminal.
     
  3. Fuelledbytea

    Fuelledbytea New Member

    Thank you :D
     

Share This Page