Hive multizone hot water request

Tom Crean

New Member
Appreciate if someone can tell me if my expectation is correct or incorrect.

I have 3 zone heating (CH up, CH down & HW cyl).

There is a hive active heating thermostat which covers CH down & HW on one thermostat and receiver. I can control both CH & HW from this one thermostat.

There is a second thermostat and receiver for the CH up and this is working fine for that CH zone.

My question is, the CH up, although its only meant for 1 zone, it also has the second boost button for HW, but this does nothing. Should I expect the HW boost to also trigger the HW request? All.decivea are available in the app, and I can trigger from there, but I would also have expected the second thermostat in smart multizone heating to also establish this connection.

Any experiences appreciated. Thanks all.
 
You have 2x dual zone hives fitted.
You would usually fit 1x dual zone and 1xsingle zone.
So the upstairs dual hive won’t have the water side connected up as there won’t be a wire for it.
 
Actually I do have a dual and a single thermostat, but the single also has the hot water boost button, which as I said is non functional.
 
Back
Top