Iolloi zigbee dimmer switch wiring

Discussion in 'Electricians' Talk' started by Sha, Jun 20, 2021.

  1. Sha

    Sha New Member

    I have the above with load P L connectors. Any idea where the C L goes? Screenshot attached
     

    Attached Files:

  2. CraigMcK

    CraigMcK Screwfix Select

    It looks like it just needs live in and feed out. What is C L?
     
  3. Sha

    Sha New Member

    I meant my old socket had a c and an l on it, common and live?

    Sorry to be dumb but which would the red wire go into and which would the black with red sheath go into?
     
  4. CraigMcK

    CraigMcK Screwfix Select

    The red will go to L, the black with red will be the dimmer contact, wave with arrow
     
    Sha likes this.
  5. The Happy Builder

    The Happy Builder Screwfix Select

  6. MGW

    MGW Screwfix Select

    upload_2021-6-21_9-19-58.png Looking at the website it seems, upload_2021-6-21_9-23-8.png is supply to lamp, L in line supply, P is connection to switch, and Cx is either linked to upload_2021-6-21_9-24-18.png if no neutral or connected to neutral if there is, but you need to check your instructions, as I may have found wrong switch.
     
  7. MGW

    MGW Screwfix Select

    upload_2021-6-21_9-29-9.png
    Another wiring diagram, so what does the instructions say that came with switch?
     
  8. Sha

    Sha New Member

    Fantastic, thanks very much. Working perfectly.
     

Share This Page