Kitchen Door Opening Restriction

Discussion in 'Kitchen Fitters' Talk' started by evo nut, Nov 29, 2009.

  1. evo nut

    evo nut New Member

    Hi Chaps,

    Fitted some kitchen doors on replacement carcusses.

    Trouble is some of the existing cabinets are fitted close to the wall and i don't want the new doors hitting the wall.

    I thought they made a restrictor which you can screw on the door and cabinet to stop the door opening so far.

    Don't really just want a piece of chain put something nicer as the lady has paid a fiar bit for the doors.

    Any suggestions please?

    many thanks

    evo nut
  2. nigel

    nigel Guest

  3. evo nut

    evo nut New Member

    hi nigel,

    been trawling through hafele's website but can't find them anywere don't surpose you know there technical name or order number do you?

    many thanks
  4. blueassedfly!

    blueassedfly! New Member

    try a bridging unit strut/damper evo you could fix it to the inside top of cabinet then to the door
  5. evo nut

    evo nut New Member

  6. fitero

    fitero New Member

    Just cut a door sized hole in the wall,purfect...
  7. blueassedfly!

    blueassedfly! New Member

    Evo not those cos theyre the ones that you have to open the door further to release the catch! i had the gas strut type in mind!
  8. Bedroom Fitter

    Bedroom Fitter New Member

    What about swapping the 110 hinges for 90 degree hinges?
  9. fuster

    fuster New Member

    If the 90 is still too much, I think there will be a hinge that will do the job - just phone Blum and ask. Or if they're no help try Daro Factors in Hackney Wick as they know all this stuff and can send it to you; very good prices too.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice