Shaun12397
New Member
I am going to start my garden ready for the summer, I am looking at building a sleeper retainer step up (2 sleepers high) the sleepers will be dug in 50mm so I will have to infill around 305mm. (Leaving thickness for artificial grass 30mm and a 15mm base layer of sand to assist drainage)
Should I use MOT type 1 to infill the 305mm I need?
I have attached a image roughly similar to what I would like to do. The area I need to fill is under the turf
thanks in advance
Should I use MOT type 1 to infill the 305mm I need?
I have attached a image roughly similar to what I would like to do. The area I need to fill is under the turf
thanks in advance