New Danfoss TRV & lockshield - missing tails?

Discussion in 'Plumbers' Talk' started by Mp1977, May 29, 2020.

  1. Mp1977

    Mp1977 New Member

    I recently bought some new radiators and a set of Danfoss TRV/lockshield valves to go with (link), and I might be crazy but I think I’m missing a tail/compression joint.

    I’ve checked each pack (bought 6 for 6 new radiators) and they are all the same, so my question is am I missing something, or should the pack only have contained 1x lockshield valve, 1x thermostatic valve, 1x tail (with compression joint) and 1x separate compression joint? From the image on Screwfix, it looks like I’m missing a tail and compression fittings.

    Image of what came in each pack attached (hopefully). Clarity welcome.

    Attached Files:

  2. terrymac

    terrymac Screwfix Select

    You are missing rad tail and olives and nuts. Are you sure they are not in the box,
    That's unusual.
  3. Mp1977

    Mp1977 New Member

    Yup - definitely not. 6 boxes, all the same.

    At least I’m not being stupid (on this occasion).

    Looks like I’ll have to try and get through to Screwfix.
  4. terrymac

    terrymac Screwfix Select

    Is there any paperwork in the box or printed on the box as to its contents ?
  5. Mp1977

    Mp1977 New Member

    Not really. There isn’t a list of ‘this box contains...’ and the ‘installation guide’ is fairly useless.
  6. Hans_25

    Hans_25 Screwfix Select

    This is what screwfix shows for the set, definitely missing something there!


Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice