Problem before tiling

Discussion in 'Tilers' Talk' started by Mike allen 86, May 18, 2018.

  1. Mike allen 86

    Mike allen 86 New Member

    morning lads I’ve got a problem and need a solution

    I’ve just finished latexing my kitchen floor and a small room 3.0m x 3.0m off the kitchen I have a difference of 25-30mm lower than the kitchen floor. The floor at the minute is 150mm concrete screed and just need to what my options are

    Can I sand and cement screed at such a small thickness

    Can I plywood straight on top (do I need a dpm)

    Or latex up to that thickness

    Any helps lads be much appreciated
     

Share This Page