Sealant agony

Discussion in 'Kitchen Fitters' Talk' started by Jime17, Oct 6, 2019.

  1. Jime17

    Jime17 New Member

    Hi. Sorry if the title was a bit dramatic....

    Ive got 3 questions im hoping for some advice on.

    I need to seal the join between my brown worktops and mid grey tiles.

    I find finishing the sealant difficult especially behing the sink where there's not much room to get the finishing tool in what with the window ledge about an inch above the worktop at that point too.

    Anyway. Ive done it but using one of those fl3xible square tools with different size corners cut off. Im not happy with the result for the reasons i gave and also because the corning dow 785+ in grey is barely grey at all. Its too light for what i want.

    So... get to the point jim....

    1. Once ive cut away the majoity of the sealant, which is the best sealant dissolver?

    2. Which sealant is best that will come in a darker grey

    3. Im looking at those fugi cramer tools. Are they the best option for an ameteur like me? Especially as they have an attachment to skate over the grout lines.

    Thanks all.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice