Unvented System - very average shower

Discussion in 'Plumbers' Talk' started by AllyG, Sep 10, 2020.

  1. AllyG

    AllyG New Member

    Hi all,

    Read plenty of these but first post so bear with me! I've recently bought a house with an unvented system. Was pretty disappointed when we moved in that the shower was pretty average.

    Was wondering if there is anything that can be done to improve/ anything to check. Flow rate is about 8l/min to shower, mains pressure and flow rate is great. Mains flow is >30l/min (outside tap upstream of prv) and internal pressure is OK (around 2 bar which matches prv at stop cock setting). Property is single storey. Not looking at spending a fortune as its no worse than leccy shower at my last place, just expected it to be better.

    Any further info, shout up. Any help massively appreciated.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice