Discussion in 'Electricians' Talk' started by Parsy, Feb 26, 2008.
Email sent Ben.
Mine is a 1996 R8 which responds to 00 instead of prog. if there is any chance you can send me a copy of the original I would appreciate it. I can get 8 lights lit with 4321-00 and then cant access or get anything to activate programming.
1234 -00 is the same. its an old box I want in the garage and a link to outside shed on another keypad
Brilliant, thankyou ever so much, realy appreciated. Will resume tomorrow and hopefully sort it out. As I said system will set, go to alarm condition and unset. Strange thing I could not get my head around "unset"green" light on remote has never been illuminated? Got battery and mains power.
Oh my, someone else has taken the reins over on this thread, incidentally Stan, could you enlighten the forum as to who the new stand in is please?
Apologies Rulland, didn’t realise the thread was exclusive?
At least he said thank you
IT'S BEEN MY SCOOP FOR YEARS!, JESUS MAN YOU GOT NO SCRUPLES?.
Seriously though, I was only wondering who had assisted the guy, All/any help, Is what a forum is about
Do you charge the same as me for the manuals btw? ............
Regards, Rulland (Entrepreneur)
'Tis a jest
Thought you may have been having an early night (age thing maybe?).”Manuals”, got to get in on the action now lockdown is upon us
Did I forward it on early in the thread? I grew up on the first edition panels . Probably got bored of replying.....
I hope I have not opened a can of worms here. Anyway update, control panel accepted my new user code and i changed ex timer, bell timer at the same time. As this is indeed a very old panel technology has progressed from my later Veritas 8 panel with the on board key panel and an RKP upstairs.The area we live in has had a few oportunist break ins, and this is to help make some noise if someone attemps a similar break in, Garage and shed have RKP keypads. so either will go to alarm conditions if activated. Hopefully enough to scare idiots away. Apprecite the Manual, the only critizisim would be the programming menu does not have the 01 option mentioned to to allow the user code change.But the other 46 are.
Oh still no green unset light though
[QUOTE="Ford34, post: 1857748, member: Apprecite the Manual, the only critizisim would be the programming menu does not have the 01 option mentioned to to allow the user code change.But the other 46 are.
Addition, too late to edit previous post
changing user code.
thankyou Sparky steve. appreciated
RULLAND::::::::::::was i supposed to reply to this?????::::incidentally Stan, could you enlighten the forum as to who the new stand in is please------Sorry cause I dont understand,
Hi Stan, If you'd looked at previous posts/replies on this thread, you'd had seen that i was sort of the appointed custodian, well it seemed that way 'cos I was doing most of the replying, lol.
Any road up, as I've said previously, we're all here to try to help, and, to that affect, Sparky Steve stepped in to help you.
My post/request to you was more tongue in cheek than anything else, just wandering who else was helping out on the thread that's all matey
Any chance I can get a copy of this - firstname.lastname@example.org. I've got web space, so can host it if desired.
E-mail sent John.
Many thanks Rich. Now online at https://www.jpwilliams.com/Veritas/InstallationManual.pdf and https://www.jpwilliams.com/Veritas/UserGuide.pdf
thanks JP Williams saved me! downloaded and saved.
Thank you very much for this!! Very useful.
Separate names with a comma.