Wall out - big gap

Discussion in 'Kitchen Fitters' Talk' started by Cadishead67, Aug 14, 2022.

  1. Cadishead67

    Cadishead67 Member

    Hi all,

    I am installing a set of howdens drawers and an integrated fridge freezer next to each other. The top of the drawer cabinet is 5mm from wall (bottom touching). However at the top of the fridge cabinet, it is nearly 15 mm out. I have attached photos.

    I was going to trim 5 mm off the bottom of the drawers and fridge but this would still leave 10 mm at top of fridge. Gven the end panel needs to overhang the doors/drawer front, the end panel won't cover it.

    Does anybody have any ideas as to how I can rectify this gap?

    Best regards
     

    Attached Files:

  2. kitfit1

    kitfit1 Screwfix Select

    Will there be wall cabs next to the F/F and will the wall be tiled ?
     
  3. Cadishead67

    Cadishead67 Member

    No wall cupboards and I wasn't planning on tiling. Good idea though.
     
  4. RichieDIY

    RichieDIY Member

    Is it possible to shim the front of the cabinet to try and close up the gap at the top?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice