Wood flooring around stairs

Hez1987

New Member
Hi
Any advice on how to lay engineered wood flooring and add edging/trim around stair spindles? . I was considering using the L shaped threshold which would butt up against the spindles, or is there a better way?
Also which shops can you get stair nosing in London? Can’t seem to see anywhere selling it other than online.
Thank you
 

Attachments

  • IMG_0212.png
    IMG_0212.png
    907.6 KB · Views: 18
  • IMG_0209.jpeg
    IMG_0209.jpeg
    2 MB · Views: 21
For a small amount of spindles such as that, I’d remove them neatly, cut the overhang off the white nosing and fit a rebated matching solid oak nosing and fit the flooring up to that, then either house the spindles into the nosing (doing this will require a nosing thicker than the flooring by about 1/4”, or fit a new baserail and glue and pin the spindles into that.
 
Back
Top